PCBSI » 我要上路 » 请教 ibs 文件报错 如何解决 ！急！！！

happybai 发表于 2010-5-21 11:18

请教 ibs 文件报错 如何解决 ！急！！！

请教 ibs 文件报错 如何解决 ！急！！！
allegro model integrity 打开ibs文件 出现以下错误：
ERROR - Model 'pvhsoscbrt_s_00_PADY' in Model Selector 'pvhsoscbrt_s_PADY_md' is not defined in the file
ERROR - Model 'pvhsoscbrt_s_01_PADY' in Model Selector 'pvhsoscbrt_s_PADY_md' is not defined in the file
ERROR - Model 'pvhsoscbrt_s_10_PADY' in Model Selector 'pvhsoscbrt_s_PADY_md' is not defined in the file
ERROR - Model 'pvhsoscbrt_s_11_PADY' in Model Selector 'pvhsoscbrt_s_PADY_md' is not defined in the file
ERROR - Model 'pvhtbsudtafs_t_00' in Model Selector 'pvhtbsudtafs_t_model' is not defined in the file
ERROR - Model 'pvhtbsudtafs_t_01' in Model Selector 'pvhtbsudtafs_t_model' is not defined in the file
ERROR - Model 'pvhtbsudtafs_t_10' in Model Selector 'pvhtbsudtafs_t_model' is not defined in the file
ERROR - Model 'pvhtbsudtafs_t_11' in Model Selector 'pvhtbsudtafs_t_model' is not defined in the file
ERROR - Model 'dqs_t_100_PADN' in Model Selector 'dqs_t_PADN_md' is not defined in the file
ERROR - Model 'dqs_t_101_PADN' in Model Selector 'dqs_t_PADN_md' is not defined in the file
ERROR - Model 'dqs_t_110_PADN' in Model Selector 'dqs_t_PADN_md' is not defined in the file
ERROR - Model 'dqs_t_111_PADN' in Model Selector 'dqs_t_PADN_md' is not defined in the file
ERROR - Model 'pvhtbcudtafs_00' in Model Selector 'pvhtbcudtafs_model' is not defined in the file
ERROR - Model 'pvhtbcudtafs_01' in Model Selector 'pvhtbcudtafs_model' is not defined in the file
ERROR - Model 'pvhtbcudtafs_10' in Model Selector 'pvhtbcudtafs_model' is not defined in the file
ERROR - Model 'pvhtbcudtafs_11' in Model Selector 'pvhtbcudtafs_model' is not defined in the file
ERROR - Model 'pvhsosca_s_00_PADY' in Model Selector 'pvhsosca_s_PADY_md' is not defined in the file
ERROR - Model 'pvhsosca_s_01_PADY' in Model Selector 'pvhsosca_s_PADY_md' is not defined in the file
ERROR - Model 'pvhbsudtart_00' in Model Selector 'pvhbsudtart_model' is not defined in the file
ERROR - Model 'pvhbsudtart_01' in Model Selector 'pvhbsudtart_model' is not defined in the file
ERROR - Model 'pvhbsudtart_10' in Model Selector 'pvhbsudtart_model' is not defined in the file
ERROR - Model 'pvhbsudtart_11' in Model Selector 'pvhbsudtart_model' is not defined in the file
ERROR - Model 'dqs_t_100_PADP' in Model Selector 'dqs_t_PADP_md' is not defined in the file
ERROR - Model 'dqs_t_101_PADP' in Model Selector 'dqs_t_PADP_md' is not defined in the file
ERROR - Model 'dqs_t_110_PADP' in Model Selector 'dqs_t_PADP_md' is not defined in the file
ERROR - Model 'dqs_t_111_PADP' in Model Selector 'dqs_t_PADP_md' is not defined in the file

Errors  : 114
Warnings: 5
File Failed
该如何解决，多谢，期待高手回帖！

Triton 发表于 2010-5-21 11:22

很多模型没有定义，也就是说很多列出的模型在IBIS文件中找不到相应的Model。

happybai 发表于 2010-5-21 11:26

这个意思能读懂，具体如何解决还请版主指点，谢了！

happybai 发表于 2010-5-21 11:31

用HyperLynx打开没有问题，回复自动添加了广告。。。

Triton 发表于 2010-5-21 12:36

如果不用那些模型的话，就把它们从Model Selector里面删掉就可以

happybai 发表于 2010-5-21 13:25

要用到的

Triton 发表于 2010-5-21 13:31

那就找厂商再要吧，要不你把文件发上来，我看一下

happybai 发表于 2010-5-21 14:40

见附件！

Triton 发表于 2010-5-21 15:12

文件中很多的Model Selector没有在PIN中用到，你删掉那些报错的部分就可以，我做了一份，累死我了。
[attach]1180[/attach]

happybai 发表于 2010-5-21 15:42

多谢 版主！！！

517279603 发表于 2010-7-21 14:48

我来学习来了，版主真是好人

查看完整版本: 请教 ibs 文件报错 如何解决 ！急！！！